Remote Engine
Remote Engine ID:
Note:
The amount of Engine ID characters must be even.
10.1.2 SNMP View
The OID (Object Identifier) of the SNMP packets is used to describe the managed objects of the
switch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View is
created for the SNMP management station to manage MIB objects.
Choose the menu SNMP→SNMP Config→SNMP View to load the following page.
The following entries are displayed on this screen:
View Config
View Name:
MIB Object ID:
View Type:
Specify the Remote Engine ID for Switch. The Engine ID is a
unique alphanumeric string used to identify the SNMP engine
on the remote device which receives informs from Switch.
Figure 10-4 SNMP View
Give a name to the View for identification. Each View can
include several entries with the same name.
Enter the Object Identifier (OID) for the entry of View.
Select the type for the view entry.
•
Include: The view entry can be managed by the SNMP
management station.
•
Exclude: The view entry can not be managed by the SNMP
management station.
105