Power Socket; Redundant Power System Socket (Switch 3848 Only); Default Settings - 3Com 3812 - SuperStack 3 Switch Getting Started Manual

Power Socket

Redundant Power System Socket
Power Socket
Redundant Power
System Socket
(Switch 3848 only)

Default Settings

Figure 5 Switch 3848
Each Power Supply automatically adjusts its power setting to any power
voltage in the range 100-240 VAC.
To protect against internal power supply failure, you can use this socket
to connect the Switch to a SuperStack 3 Advanced Redundant Power
System. See "Connecting a Redundant Power Supply (Switch 3848 only)"
on page 23.
Table 5 shows the default settings for the Switch 3812, Switch 3824 and
Switch 3848. If you initialize one of the Switch units, it is returned to
these defaults.
Table 5 Default Settings
Feature
Port Status
Port Speed
Duplex Mode
Flow Control
Broadcast Storm Control
Virtual LANs (VLANs)
Multicast Filtering
Rapid Spanning Tree Protocol
Link Aggregation Control
Protocol (LACP)
Spanning Tree Protocol
Smart Auto-sensing
—
rear view
Switch 3812, Switch 3824, or Switch 3848
Enabled
Auto-negotiated
Auto-negotiated
Disabled
Enabled
Threshold: 3000 broadcast frames per second
All ports belong to the untagged Default VLAN
(VLAN 1)
IGMP filtering enabled
Enabled
Disabled per port
Enabled
Enabled
Default Settings 17