Web Interface Management; Snmp Management; Setting Up Command Line Interface Management - 3Com 3812 - SuperStack 3 Switch Getting Started Manual

40 C 3: S
HAPTER ETTING
Web Interface
Management

SNMP Management

Setting Up
Command Line
Interface
Management
U M
P FOR ANAGEMENT
Each Switch has an internal set of web pages that allow you to manage
the Switch using a Web browser remotely over an IP network (see
Figure 15).
Figure 15 Web interface management over the network
Workstation
Refer to "Setting Up Web Interface Management"
You can manage a Switch using any network management workstation
running the Simple Network Management Protocol (SNMP) as shown in
Figure 16. For example, you can use the 3Com Network Supervisor
software that is provided on the CD-ROM that accompanies your Switch.
Figure 16 SNMP management over the network
SNMP Network Management
Workstation
Refer to "Setting Up SNMP Management"
This section describes how you can set up command line interface
management using a local console port connection or over the network.
Connect over Network
via web browser
Connect over Network
using SNMP
on
Switch
on page 42.
Switch
page 43.