Resetting The System; Dimming The Display; Using And Taking Care Of Discs; Titles, Groups, Chapters And Tracks - Pioneer HTZ-830DV Owner's Manual

12 Additional information

Resetting the system

Use this procedure to reset all system settings
(except for station memory) to the factory
default.
1 Switch the system into standby.
2 Press and hold the top panel  (Stop)
button for about 8 seconds until the
display shows 'Mem.Clr.?'.
3 Press the top panel  button.
The system's settings are now reset, and you
should see the 'Welcome to Pioneer DVD !'
screen.

Dimming the display

• Default setting: 3
The display has three brightness levels (1–3).
1 Press DIMMER to change the
brightness level of the display unit.

Using and taking care of discs

Titles, groups, chapters and tracks

DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
Title 1
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
DVD-Audio discs are divided into one or more
groups that can each contain a number of
tracks.
Group 1
Track 1 Track 2
78
En
Title 2 Title 3
Group 2 Group 3
Track 3 Track 1 Track 1 Track 2
CDs, SACDs and Video CDs are divided into
tracks.
Track 1 Track 2 Track 3 Track 4
CD-ROMs contain folders and files. MP3 files
are referred to as tracks. Folders may contain
further folders.
Folder A
Track 1 Track 2 Track 3

DVD Video regions

All DVD Video discs carry a region mark on
the case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD system also has a region
mark, which you can find on the rear panel.
Discs from incompatible regions will not play
in this player. Discs marked ALL will play in
any player.
The diagram below shows the various DVD
regions of the world.

Handling discs

When holding discs of any type, take care not
to leave fingerprints, dirt or scratches on the
disc surface. Hold the disc by its edge or by
the center hole and edge.
Track 5 Track 6
Folder B Folder C
Track 1 File 1 File 2