Resume And Last Memory - Pioneer HTZ-830DV Owner's Manual

Getting started
Button What it does

Pauses a disc that's playing, or
restarts a paused disc.

Stops playback.
DVD and Video CD: The display
shows Resume. Press  again if
you want to cancel the resume
function. (See also Resume and
Last Memory below.)

Press to start fast reverse
scanning. Press  (play) to
resume normal playback.

Press to start fast forward
scanning. Press  (play) to
resume normal playback.

Skips to the start of the current
track or chapter, then to previous
tracks/chapters.

Skips to the next track or chapter.
FOLDER +/–
Skips to the next/previous folder
(SUB)
when playing a JPEG or MP3
disc.
Numbers
Use to enter a title/track/group/
chapter number. Press ENTER to
select (or wait a few seconds).
• If the disc is stopped, playback
starts from the selected title/
group (for DVD-Video/DVD-
Audio) or track number (for
SACD/CD/Video CD
• If the disc is playing, playback
jumps to the start of the selected
chapter or track (within the
current group for DVD-Audio).
• You may find with some DVD discs that
some playback controls don't work in
certain parts of the disc. This is not a
malfunction.
• Track skip and number buttons for track
selection do not work with unfinalized CD-
R/RW discs.
Using the top panel controls
The  OPEN/CLOSE,  and  (stop)
buttons on the top panel work the same way
as the remote control equivalents.

Resume and Last Memory

When you stop playback of a DVD or Video CD
disc, Resume is shown in the display indi-
cating that you can resume playback again
from that point.
If the disc tray is not opened, the next time you
start playback the display shows Resume and
playback resumes from the resume point.
For DVD discs only: If you take the disc out of
the player, the play position is stored in
memory. When you load the disc next time,
the display shows Last Mem and you can
resume playback (this works for up to five
discs).
If you want to clear the resume/last memory
point, press  (stop) while Resume or Last
Mem is displayed.
/MP3
).
• When a Video CD is loaded, the Resume
point is lost if the system is switched off,
or switched to a function other than DVD
(CD).
• For the Last Memory function to work, you
must press  (stop) to stop playback
before opening the disc tray.
03
25
En