Getting Started; Switching On And Setting Up - Pioneer HTZ-830DV Owner's Manual

Getting started

Chapter 3
Getting started

Switching on and setting up

After making sure everything is connected up
properly, you're ready to switch on. The first
thing to do is to tell the system what kind of TV
you're using, standard or widescreen.
After that you can set up the surround sound
for your room, and set the clock so that you
can use the timer features.
STANDBY/ON
CD FM/AM
DVD TUNER
DISPLAY
DVD MENU
TUNE+
ST–
ENTER
TUNE–
MUTE
MASTER
VOLUME
TV CONTROL
CH
1 Press  STANDBY/ON (on the remote
or on the front panel) to switch the system
on.
Also make sure that your TV is switched on
and that the video input is set to this system.
L1/L2
TV LINE
OPEN CLOSE
RETURN
ST+
SOUND
VOL
INPUT
You should see the welcome screen
displayed.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
2 Press ENTER to move on to the next
screen.
Use the / (cursor left/right)
3
buttons to select either 'Wide screen
(16:9)' or 'Standard size screen (4:3)'
according to the kind of TV you have, then
press ENTER.
See also Screen sizes and disc formats on
page 87 if you're not sure which one to
choose.
Let's Get Started Menu Let's Get Started Menu
What kind of TV do you have? What kind of TV do you have?
Use the Use the / /
to choose, then press [ENTER] to choose, then press [ENTER]
Wide screen (16:9) Wide screen (16:9)
Next
cursor buttons cursor buttons
Standard size screen (4:3) Standard size screen (4:3)
03
19
En