A&D TM-2430 Instruction Manual page 20

Step13 Press the
block is displayed.
Step14 Press the
minutes as the frequency of the third block.
Step15 Press the
block is displayed.
Step16 Press the
parameters and displays the clock, (because the current
start time of the fourth block is the same start time of the
first block).
Selection for the Automatic Measurement
START STOP
key. The current frequency of the third
AUTO ON/OFF
key so as to display "10" for 10
START STOP key. The current start time of the fourth
key. The recorder stores these
START STOP
Page 18
From previous page
START STOP
AUTO ON/OFF
START STOP
START STOP
Initializing the recorder