Conditions When Recorder Switched On; Parameters For The Display And Clock - A&D TM-2430 Instruction Manual

Conditions When Recorder Switched On

The recorder can be turned on in 3 different modes.
When recorder is
turned on.
The beeper sounds
once and the clock is
displayed. (Normal
mode)
The beeper is sounded
once and
The buzzer sounds
four times and
blinks.

Parameters for the Display and Clock

This setting selects the display during automatic measurement sequence and
adjusts the clock parameters. The sequence number tells you which parameter
you are adjusting.
Display & key
Sequence number
Parameter
Items
Value &
Sequence
range
number
0
1
1
00 ~ 99
5
01 ~ 12
6
01 ~ 31
7
00 ~ 23
8
00 ~ 59
9
Initializing the recorder
The recorder parameters
are stored
All parameters are lost.
blinks.
E00
The mode after reset. All
E00
parameters are lost.
START
STOP
Sign of setting up parameters for display and clock
Meaning of parameters
Displaying clock only in automatic measurement
Displaying pressure and result in automatic
measurement
Years (1997 ~ 2096)
Month
Day
Hour
Minute
Condition
Selecting a sequence
number
AUTO
ON/OFF
Selecting a parameter
Conditions When Recorder Switched On
Page 13
Actions
You can use the re-
corder at once.
Set up parameters of
"display and clock"
and "Automatic mea-
surement".