Rear Panel - Alcatel-Lucent OmniSwitch 6600 Family Hardware User's Manual

OmniSwitch 6600 Family Chassis and Hardware Components

Rear Panel

The rear panel of OmniSwitch 6600 Family switches contains the following major components:
Note. Arrangement and location of components vary depending on chassis type.
Factory-installed power supply (all OmniSwitch 6600 Family switches)
•
Backup power supply bay for optional OS6600-BPS (OS6624, OS6648, OS6600-U24), OS6602-BPS
•
(OS6602-24 and OS6602-48), or OS6602-BPS-DC (OS6602-24 and OS6602-48) power supply
Connector for OS6600-BPS-P PoE backup power supply (OS6600-P24 only)
•
Power switch (OS6624, OS6648, OS6600-U24, OS6600-P24)
•
Grounding block for type LCD8-10A-L grounding lug (all OmniSwitch 6600 Family switches)
•
Redundant Power Supply Bay
Slot for optional user-installable OS6600-BPS (OS6624,
OS6648, OS6600-U24) or OS6602-BPS (OS6602-24 and
OS6602-48) backup power supply. For more information on
the backup power supply, including technical specifications
and installation instructions, refer to
on page 2-26.
Note: The OS6600-P24 does not have a backup power supply
bay. Instead, it has a connector for the OS6600-BPS-P PoE
backup power supply.
OmniSwitch 6600 Family Hardware Users Guide
Power Switch
indicates on position;
indicates off position.
Product, Safety, and Compliance Information
Refer to the "Regulatory Compliance and Safety
Information" chapter for detailed information.
MODEL NO: OS-6648
RATING: 100-240V
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A RESPECTE TOUTS LES
EXIGENCES DU REGLEMENT SUR LE MATÉRIEL BROUILLEUR DU CANADA.
Assembled in the US of US and Non-US Components
"Backup Power Supply"
OmniSwitch 6600 Family Rear Panel
September 2006
CAUTION: ATTENTION:
THIS UNIT MAY BE EQUIPPED CET APPAREIL COMPORTE
!
WITH TWO POWER CONNECTIONS. TO REDUCE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE
THE RISK OF ELECTRICAL SHOCK, DISCONNECT PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHE
BOTH POWER CONNECTIONS BEFORE LES DEUX CORDONS D'ALIMENTATION AVANTE DE
SERVICING UNIT. FAIRE LA REPARATION.
100/115/230 V
U.S. PATENT NO. 5,394,402 50/60 Hz, 2/2/1 A
50-60Hz, 1.02A
LISTED
I.T.E.
5Z71
E164613C
R R
TUV
Rheinland
ProductSafety
geprufte
Sicherheit
Power Connector Socket
Type IEC-320-C13. Supports
one 10 amp power cord.
It is recommended that you use
only Alcatel-provided power
cords.
Rear Panel
Ground Lug Connection
Unpainted area for Type
LCD copper lug attach-
ment. Refer to page 2-25
for more information.
LAN PWR PORT
PoE Power Connector
Reserved for use with the
PoE backup power supply
on the OS6600-P24. See
Chapter 3, "Installing and
Managing Power over
Ethernet (PoE)."
page 2-20