Viewing OS6600-BPS-P Status
Viewing OS6600-BPS-P Status
To view the current status of power supplies installed in the backup power supply, use the
command as shown below.
-> show power 2
Power Supplies in chassis 2
PS
Operational Status
-----+-------------------
PS-1
UP
PS-2
UP
The OS6600-BPS-P will always display as "PS-2". For detailed information on show power command
output, refer to the CLI Command Reference Guide.
page 3-4
Installing and Managing Power over Ethernet (PoE)
OmniSwitch 6600 Family Hardware Users Guide
show power
September 2006