Preventing The Tv From Falling Over - Panasonic Viera TX-L32E5B Operating Instructions Manual

Assembly screw (4)
XSS5+15FNK
M5 × 15
Assembly screw (4)
XYN4+F25FJK
M4 × 25
1 Assembling the pedestal
Use the assembly screws
to the base
Make sure that the screws are securely
tightened.
Forcing the assembly screws the wrong way
will strip the threads.
C
Front
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws

Preventing the TV from falling over

Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
The place where the pedestal is to be fixed should be thick enough and made of hard material.
8
Bracket
TBL5ZA32261 (TX-L32E5B)
TBL5ZA32591 (TX-L37E5B)
TBL5ZA32821 (TX-L42E5B)
to fasten the bracket
securely.
A
D
from the TV.
from the bracket.
Base
TBL5ZX0280 (TX-L32E5B)
TBL5ZX0276 (TX-L37E5B)
TBL5ZX0272 (TX-L42E5B)
(TX-L47E5B) TBL5ZX04091 (TX-L47E5B)
2 Securing the TV
Use the assembly screws
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
Carry out the work on a horizontal and level surface.
Arrow mark
Hole for pedestal installation
Screw (not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Screw hole
to fasten securely.
B