Watching Tv - Panasonic Viera TX-L32E5B Operating Instructions Manual

Watching TV

Volume
To select a channel using Information banner (p. 20)
It is possible to confirm the channel name and programme information by using the Information banner before
changing channels.
1
Display Information banner if it is not displayed
To select a channel using TV Guide (p. 23)
It is possible to confirm the channel and programme information by using the TV Guide (EPG) before changing
channels.
1
Display TV Guide
Note
To watch pay-TV "Using Common Interface" (p. 53)
Turn power on
1
Press for about 1 second.
Mains power On / Off switch should be on. (p. 10)
VIERA Connect introduction banner appears
Every time you turn on the TV, this banner appears at the bottom of the
screen.
You can access to VIERA Connect easily and enjoy the various
contents. (p. 18)
To remove this banner, leave for about 5 seconds or press any
buttons (except the buttons to access VIERA Connect).
To set this banner display off
The banner is subject to change.
Select the mode
2
Select a channel
3
up
or
down
2
Select the current
programme or channel
select
access
[VIERA Connect Banner] (p. 38)
You can also select the mode pressing the TV
button repeatedly on the remote control or the
TV (p. 10).
DVB channel position numbers run from 1 onwards.
Analogue channel position numbers run in the ranges
0 - 99.
To select a more than two-digit channel position
number, e.g. 399
2
While the banner is displayed, select the channel
select channel
watch
3
Select [View] (DVB)
Das Erste
19:30- 20:00
View Timer Programming
select
watch
19