Table of Contents
Advertisement
VIERA Link "
Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
This TV supports "HDAVI Control 5" function.
Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and
SCART cables allow you to interface them automatically (p. 74, 75).
These features are limited to models incorporating "HDAVI Control" and "VIERA Link".
Some functions are not available depending on the equipment's version of HDAVI Control. Confirm the connected
equipment's version of HDAVI Control.
VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known
as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.
As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed.
Please refer to individual manuals for other manufacturers' equipment supporting VIERA Link function.
For information about applicable Panasonic equipment, consult your local Panasonic dealer or refer to
www.panasonic.co.uk
Preparations
Connect the equipment supporting VIERA Link.
VIERA Link connection
Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilised.
Recommended Panasonic's HDMI cable part number:
RP-CDHS15 (1.5 m)
•
Use fully wired SCART cable.
Set up the connected equipment. Read the manual of the equipment.
For optimal recording, the settings of the recorder may need to be changed. For details, read the manual of the
recorder.
Download Analogue channel setting
Set [VIERA Link] to [On] in the Setup Menu.
Set up the TV.
After connection, turn the equipment on and then switch the TV on.
Select the input mode from HDMI1, HDMI2, HDMI3 or HDMI4 (p. 29), and make sure that an image is displayed
correctly.
This setup should be done each time when the following conditions occur:
for the first time
•
when adding or reconnecting equipment
•
when changing setup
•
Features available
Analogue channel download
Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue is still
broadcast). Digital channel settings are not downloaded.
To download the Analogue channel settings
[Q-Link Download] (p. 37), [Auto Setup] (p. 14, 44)
Easy playback
Automatic input switching - When the connected equipment is operated (during playback or menu operations, etc.), the
input mode is switched automatically. When playback is stopped or menus are exited, the input mode returns to the
original setting.
Power on link
When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment are activated, the
TV is turned on and input mode is switched automatically so that you can view the content. (Only when the TV is in
Standby mode.)
Power off link
When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.
This function will work even if the TV enters Standby mode automatically by auto power standby function.
"
(p. 74, 75)
RP-CDHS30 (3.0 m)
•
"Analogue channel download" (see below)
[VIERA Link] (p. 37)
RP-CDHS50 (5.0 m)
•
77
Hide quick links:
Advertisement
Table of Contents
