Audio Output Settings - Panasonic Viera TX-L32E5B Operating Instructions Manual

Video Setup
Setup the settings for Video mode.
Menu items and selectable options vary depending on the content.
1
Display the option menu
Menu Item
Video Preview
Multi Audio,
Dual Mono Audio
Subtitle
Subtitle Text
Aspect Change
Repeat
Title

Audio output Settings

You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
To confirm or change the current sound status
1
Display the menu and Select [Sound]
Menu Item
SPDIF Selection
2
Select [Video Setup]
Option Menu
Video Setup
Adjustments / Configurations (alternatives)
Sets to start the preview of the title or scene in the thumbnail view [Off] / [On]
Image may not be displayed for an instant in the thumbnail view. Set the preview
[Off] to resolve this.
Only available in the thumbnail view
Selects between selectable sound tracks (if available)
It may take several seconds to change the sound.
Only available during playback
Subtitles On / Off (if available)
Only available during playback
Selects the font type to display subtitles correctly. (if available)
Only available during playback
[Aspect1]: Displays the content enlarged without distortion.
[Aspect2]: Displays the content full-screen.
[Original]: Displays the content original size.
You can also change the aspect using the ASPECT button.
Aspect change may not work depending on the content.
Only available during playback
Playback repeat within the title or selected file (depending on the content)
[Off] / [On]
Selects from a group of titles (if available)
(see above)
Sound
select
access
Adjustments / Configurations (alternatives)
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
2
Select [SPDIF Selection] and set
SPDIF Selection Auto
Reset to Defaults Reset
select
access / store
3
Select the items and set
select
access / store
2/2
63