Using Common Interface - Panasonic Viera TX-L32E5B Operating Instructions Manual

Using Common Interface

The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules.
This TV works only for Pay TV modules complying with CI standard.
This function is not available for BskyB's Sky channels.
Video and audio signals may not be output depending on broadcasts or services.
Caution
Turn off Mains power On / Off switch whenever inserting
or removing the CI module.
If a view card and a card reader come as a set, first
insert the card reader, then insert the view card into the
card reader.
Insert the module in the correct direction.
Remove the CI module from the TV when placing the
TV facing upward. This may cause damages to the CI
module and CI slot.
Insert the CI module (optional)
The features that appear on screen are dependent on the contents of the selected CI module.
Follow the instructions that came with the viewing card to tune in the encrypted channels. If encrypted channels do
not appear, perform the below to verify the card is recognised by the TV.
For more details, read the manual of the CI module, or check with the broadcaster.
Select DVB
1
(p. 19)
Display the menu and select [Setup]
2
Select [System Menu]
3
System Menu
Select [Common Interface]
4
Common Interface
Access Common Interface and follow the on-screen instructions
5
Common Interface
Slot 1:
On-screen instructions may not correspond to the remote control buttons.
Setup
Access
Access
Module inserted
Rear of the TV
select
access
select
access
select
access
CI slot
Insert or remove completely
CI module
53