Maintenance - Panasonic Viera TX-L32E5B Operating Instructions Manual

Message
Timer already expired !
Timer incorrect !
Timer overlap.
Press OK to keep, RETURN
to edit.
Tuner Locked
Press EXIT to unlock and stop
recording
Unable to download, please
check equipment
Media Player / Network
Message
Cannot read file
No Device Inserted
No valid file to play
This operation is not possible
An internal error occurred.
Cannot read file
Communication with the
server failed.
Connection to the server failed.
Server not found
The software update is not
completed.
Ethernet cable not connected

Maintenance

First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel,
cabinet, or pedestal by using a soft cloth to clean the
dirt or fingerprints.
Caution
Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.
Take care not to subject the TV's surfaces to water or detergent. Liquid inside the TV could lead to product failure.
Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the
surface with your fingernail or other hard objects.
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
98
The starting time in Timer Programming has already passed. Set the timer
correctly (p. 48).
Set the start and end times in Timer Programming correctly (p. 48).
Timer programming events are overlapped. Press the OK button to keep the
overlapped setting. [Ext Rec.] is given priority over [Reminder]. When two or
more [Ext Rec.] overlap, the first timer programming event starts and finishes
as programmed. The next timer programming event can then start.
If you want to unlock the tuner, cancel Direct TV Recording (p. 76, 78) or the
recording of Timer Programming (p. 48).
The tape or disc is active. Stop the equipment and try again.
The file is broken or unreadable.
Check applicable data format. (p. 86, 87)
Confirm the SD Card or USB device is inserted correctly.
The card has no data.
The selected operation is not available.
Check the settings. (p. 67 - 70)
The file is broken or unreadable. Check applicable data format. (p. 86, 87)
This might be a problem of the media server.
Read the manual of the server software.
Check the connections and settings. (p. 66 - 70)
There are no available media server on your home network.
Check the connections and settings. (p. 66 - 70)
Network download failed. Check the connections and settings. (p. 66 - 70)
Check the connection of the LAN cable. If you use a hub, also check the light
on the hub is lit.
The LAN cable might be defective.
For stubborn dirt:
First clean the dust on the surface. Dampen a soft cloth with
clean water or diluted neutral detergent (1 part detergent to 100
parts water). Wring the cloth and wipe the surface. Finally, wipe
away all the moisture.
Meaning / Action
Meaning / Action