Sewing Fixed Stitches - Brother S-7220B Instruction Manual

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-4. Sewing fixed stitches

0827M
1
2
3
<Automatic thread trimming>
Press the thread trimming key to turn on the thread trimming function. When the treadle is
continuously depressed, thread trimming is carried out after the fixed stitches have been sewn.
<Automatic sewing>
When the AUTO key is pressed to turn on the automatic sewing function, the fixed stitches are sewn
simply by depressing the treadle once without needing to depress it continuously.
<Start and end backtack sewing>
• The start backtack key and end backtack key can be pressed to turn on the backtack sewing
• If changing the number of end backtack stitches in C and D, press the fixed stitch key to
21
After the set number of stitches in E (fixed stitches) have been sewn, the sewing machine
stops in the needle position that has been set by the needle up/down key (refer to p.25). After
this, normal sewing is carried out if the treadle is depressed.
After the thread is trimmed, fixed stitch sewing mode is enabled.
function.
temporarily turn off the fixed stitch function before making the change. (The CD display will show
the number of stitches and the setting can then be changed.)
S-7220B
Example:
From 1 to 1999 stitches can be set.
2161M
2159M
2160M