Installing The Monitor And Keyboard Tray Into A Rack - IBM 7316 - TF1 Rack Console Installation And Maintenance Manual

Installing the Monitor and Keyboard Tray into a Rack

Removing rack doors and side panels might make installation easier. For additional information about
removing the doors, refer to the documentation that was provided with your rack cabinet.
To install the tray into the rack:
1. Select a location in the rack for the monitor and keyboard tray.
2. Using the following illustration as a guide, install 4 cage nuts (on square-holed rack flanges) or 4 clip
nuts (round-holed rack flanges) in the same EIA positions on the front and rear of the rack.
Note: If you are planning to install the optional console switch, also install a cage nut or clip nut in
the center-rear position as shown in the following illustration.
4
7316-TF3 17-Inch Flat Panel Rack-Mounted Monitor and Keyboard: Installation and Maintenance Guide