Backup_Interface Messages - Cisco 3845 - Security Bundle Router Manual

Chapter 2 Messages and Recovery Procedures
Error Message AUTHMGR-5-VLANASSIGN: VLAN [dec] assigned to Interface [chars]
AuditSessionID [chars]
Explanation
second [chars] is the session ID.
Error Message AUTHMGR-7-FAILOVER: Failing over from [chars] for client ([chars]) on
Interface [chars] AuditSessionID [chars]
Explanation
another method. The first [chars] is the current authentication method, the second [chars] is the
client ID, the third [chars] is the interface, and the fourth [chars] is the session ID.
Error Message AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for
client ([chars]) on Interface [chars] AuditSessionID [chars]
Explanation
failed. The first [chars] is the client ID, the second [chars] is the interface, and the third [chars] is the
session ID.
Error Message AUTHMGR-7-RESULT: Authentication result [chars] from [chars] for
client [chars] on Interface [chars] AuditSessionID [chars]
Explanation
authentication, the second [chars] is the authentication method, the third [chars] is the client ID, the
fourth [chars] is the interface, and the fifth [chars] is the session ID.

BACKUP_INTERFACE Messages

Error Message BACKUP_INTERFACE-5-VLB_NON_TRUNK: Warning:
allowed on non-trunk ports.
OL-23408-01
A VLAN was assigned. [dec] is the VLAN ID, the first [chars] is the interface, and the
No action is required.
Recommended Action
The authorization manager is failing over from the current authentication method to
Recommended Action No action is required.
All available authentication methods have been tried for the client, but authentication
Recommended Action No action is required. If local authorization has been configured, the port is
authorized based on the local authorization method. Otherwise, authentication is restarted according
to the configured reauthentication period.
This messages provides authentication results. The first [chars] is the status of the
No action is required.
Recommended Action
Flex Link VLAN load-balancing (VLB) detected a nontrunk port. [chars] is the
Explanation
interface name.
Change the interface to trunking mode.
Recommended Action
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
Please configure [chars] to be a trunk port.
BACKUP_INTERFACE Messages
Flexlink VLB is not
2-7