Tcammgr Messages - Cisco 3845 - Security Bundle Router Manual

Chapter 2 Messages and Recovery Procedures
Error Message SW_VLAN-6-VLAN_DAT_CACHE_EXISTS: Unexpected vlan.dat cache exists.
Removing the cache and continuing the sync with new set.
Error Message SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to [chars].

TCAMMGR Messages

Error Message TCAMMGR-3-GROW_ERROR: cam region [dec] can not grow.
Error Message TCAMMGR-3-HANDLE_ERROR: cam handle [hex] is invalid.
Error Message TCAMMGR-3-INDEX_ERROR: cam value/mask index [dec] is invalid.
OL-23408-01
Explanation This message does not affect switch functionality.
No action is required.
Recommended Action
The VTP domain name was changed through the configuration to the name specified in
Explanation
the message. [chars] is the changed domain name.
No action is required.
Recommended Action
The specified CAM region is configured as a static region with a fixed number of
Explanation
entries, and a caller requested to add more CAM entries. [dec] is the CAM region.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
The CAM handle used by the caller is not valid. [hex] is the handle value.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
The CAM index used by the caller is not valid. [dec] is the index value.
Explanation
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
TCAMMGR Messages
2-73