Idbman Messages - Cisco 3845 - Security Bundle Router Manual

IDBMAN Messages

IDBMAN Messages
Error Message IDBMAN-3-AGGPORTMISMATCH: [chars]: [chars]([dec] / [dec]) does not
match internal slot/port state [chars]([dec] / [dec]).
Error Message IDBMAN-3-DELETEDAGGPORT: [chars]([dec] / [dec]) Group [dec] has been
deleted, but is being reused.
Error Message IDBMAN-3-INVALIDAGGPORTBANDWIDTH: [chars]([dec] / [dec]) has an
invalid bandwidth value of [dec].
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-22
There is an internal error that caused the software to use an invalid aggregate port. The
Explanation
first [chars] is the name of the function where the error occurred. The second and third [chars] are
the port-channel names, and the ([dec] / [dec]) are the slot and port numbers (slot/port).
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
There is an internal error that caused a deleted interface to be reused for a new aggregate
Explanation
port. [chars] is the port-channel name, and the ([dec] / [dec]) are the slot and port numbers
(slot/port). The last [dec] is the channel-group number.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
There is an internal error that caused an invalid bandwidth to be used for an aggregate
Explanation
port. [chars] is the port-channel name. The ([dec] / [dec]) are the slot and port numbers (slot/port).
The last [dec] is the bandwidth.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
Chapter 2 Messages and Recovery Procedures
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
OL-23408-01