Table of Contents
Advertisement
Page 16 of 29
Another way to edit the NEXT TAKE NAME is from the tab of that label. When you access the take name
from its own tab, you cannot accidently arm/disarm an input channel. Otherwise, the screen is similar.
Use whatever screen you feel comfortable with.
The PAN LEVEL tab is where you would normally access the OUTPUT LEVEL and PAN controls for each
input channel. Pressing the virtual knob will link it to the physical DATA knob on the recorder. An
advantage of using this screen instead of the Channel Setup screen for these functions is that the PAN
LEVEL screen shows meters for each channel as well as the master LR mix.
To return to the root HOME screen at any time, you can either untap the tab or just press the HOME
button.
Solo mode
If you press on the meter display of any input channel, it will turn yellow, indicating that you are now in
the SOLO monitoring mode. This allows you to listen to any individual channel, rather than to the master
LR mix. Note that when solo is lit up, a virtual solo volume control appears in the upper right of the
screen. It will vanish when you exit the solo mode.
Advertisement
Table of Contents
