Table of Contents
Advertisement
Page 19 of 29
Go to the PROJECT button and select the MAKE FOLDER tab. Name this (scene) HEADER-TONE or
something similar.
Go to the System Setup screen and select INT MIC for slate type. Press RECORD and speak the following
information while depressing the slate button.
Production Title and Number
Date
Name of the soundmixer
Location
The following is being recorded with 8 tracks of iso and a 2-track Production mixdown
on the Tascam HS-P82 digital recorder at 16bit, 48K (or whatever your format is) at
23.976 timecode (or whatever your timecode rate is).
The following reference tone will be 30 seconds recorded at negative 20dB (or whatever
your headtone reference level is).
Press STOP. Go to the System Setup screen and change the INT MIC to TONE.
The RC-F82 allows you to program "Slate (MIC)" and "Slate (TONE)" to the Function keys, so
that gives you a way to get quick access to these rather than have to go to the system setup
screen every time.
Press RECORD and use the slate button to generate TONE. Capture 30 seconds of continuous tone.
Remember to go back to the PROJECT screen and select or create an appropriate scene, and load it. You
do not want to record normal takes while in the HEADER-TONE scene.
Advertisement
Table of Contents
