Table of Contents
Advertisement
Page 20 of 29
New Take, New Scene
As explained before, the take numbers will increment automatically every time you RECORD and STOP.
In addition, you can manually change the number for the next take by using the tab at the bottom of the
root HOME screen.
To change to a new SCENE number, you need to remember that Tascam uses the term FOLDER instead
of scene.
Go to the PROJECT screen either by pressing the scene/take box just above the meters on the HOME
screen, or by pressing the PROJECT button. Then, just press the name of your project, and the screen
will advance to display all of the scenes within it. You will see the MAKE FOLDER tab at the bottom of the
screen.
Select the MAKE FOLDER tab, and type in the new scene number, such as S_002D (or whatever).
Advertisement
Table of Contents
