Installing Updates; Aborting An Installation - HP ProLiant DL320e User Manual

Hp smart update manager 5.3 user guide

Hide thumbs Also See for ProLiant DL320e:

User manual (103 pages)

Specification (45 pages)

Quickspecs (41 pages)

Table Of Contents

Table of Contents

This screen appears after HP SUM completes the dependency checks for each target. The status

column notifies you whether each target has updates available, is ready to update, or if there are

dependencies you need to resolve.

On the Select Bundles or Select Components screen, you can select the devices on each target that

you want to update. Click Select Bundles to use a collection of components that have been tested

together for the target. The Select Bundles screen also allows you to install unbundled components

in addition to the bundles available for the target. Click Select Components to apply individual

components to devices. For more information on selecting bundles or components, see

bundles" (page 26)

The Selection area of the screen displays the following information:

Target Name—This field displays the name of the target selected for update.

Status—This field displays the status of the target. The status message "Ready to update"

indicates that at least one update is selected for installation. Status messages about failed

dependencies also appear in this field. To select updates, resolve failed dependencies, or

view device selection problems, click Select Bundles or Select Components. Both links display

a list of all available updates for your targets.

◦

The Select Bundles screen lists updates bundled in release sets first, by bundle, followed

by unbundled updates components. If a bundle is checked, then at least one part of that

bundle is selected. Expand the items to view and select or clear the disk controllers and

disk drives available for update.

◦

The Select Components screen lists all available updates separately, whether or not they

are included in bundles. The list has two parts. Updates that are selected to be installed

are listed at the top, followed by any updates that are not selected. You can select or

clear updates in this view, as well as in the Select Bundles view. If a component is part

of multiple bundles, it is only shown once. If there are multiple versions of a component,

HP SUM adds an expansion box next to the most recent version of the component. To

install an older version of the component, expand the list, and then select the older

component version.

NOTE:

on the Select Bundles screen, these selections are also applied to the Select Components

screen.

Last Updated—This field displays the last time this target was updated by HP SUM from the

current host running HP SUM.

Associated Target—This field displays the IP address of the target, if the target is listed on

another server's OA host servers list.

Description—This field displays a brief description of the target.