HP ProLiant DL320e User Manual page 60

Table 3 HP SUM Linux network ports
Ports
Port 22
Port 443
Port 62286
Ports 80 or 63000–63005
60 Advanced topics
Description
Establishes a connection to the remote Linux server via SSH. For Integrity servers,
HP SUM uses this port to discover target settings.
A secure data port used to transfer information.
Default for some internal communications. It listens on the remote side if there is
no conflict. If a conflict occurs, the next available port is used.
Updates are passed to the target and retrieved through an internal secure web
server that uses port 80 if it is available. If it is not available, the Web server uses
first available port in the range of 60000-63005. This support allows iLO and VC
firmware updates without having to access the host server. It also allows servers
running VMware or other virtualization platforms to update their iLO without having
to reboot their server or to migrate their virtual machines to other servers.
NOTE: HP SUM attempts to determine if a server running HP SUM also hosts a
web server. In some cases, HP SUM cannot detect an existing web server and
attempts to use port 80. If this occurs, installations that use HP SUM will fail. If
failure occurs, move HP SUM to another server or workstation that is not already
running a web server. You can also disable the web server until HP SUM
installations are complete.