HP ProLiant DL320e User Manual page 51

Parameter
LOCALACCESS-ENABLED
LOCALACCESS-TYPE
TRUSTMODE
CERTLIST
XENAMELIST
Description
This parameter is ignored unless the
IP-RESTRICTED-LOGINS parameter
is set to yes.
HP Systems Management Homepage
uses this parameter to determine
whether to enable local anonymous
access to the web services. (Applies
to Linux PSP only.)
HP Systems Management Homepage
uses this parameter to determine the
type of access granted to local users.
(Applies to Linux PSP only.)
HP Systems Management Homepage
uses this parameter to set up the trust
relationship mode. (Applies to Linux
PSP only.)
Enables you to provide a list of
certificate files or servers where
certificates can be obtained for trust
relationships for the HP Systems
Management Homepage. (Applies to
Linux PSP only.)
Enables you to provide a list of
servers, separated by semicolons, for
trust relationships for the HP Systems
Management Homepage. (Applies to
Linux PSP only.)
This parameter is valid only if the
TRUSTMODE parameter is set to
TrustByName. (Applies to Linux PSP
only.)
Possible values
YES (default to include
anonymous access)
NO
Anonymous (default)
Administrator
CAUTION: Selecting local
access with administrator
privileges as the login provides
full access to any user who has
access to the local console,
without prompting for a user
name or password.
TrustByCert—If you use this
value, you must define the
CERTLIST parameter to
enable access to the server.
TrustByName—If you use this
value, you must define the
XENAMELIST.
TrustByAll—HP does not
recommend using this value
because of possible negative
security consequences.
CAUTION: The accepted
values are case-sensitive and
must be capitalized as shown.
Failure to do so prevents the
trust relationship from being set
up properly during installation
and might affect access to the
web server.
Certificate file name or Server
DNS name
Server DNS name
Input files 51