3. Secure the keyboard by tightening the screws from the bottom side of the computer.
1080 Palm rest assembly, power-on board assembly (with cable), and
microphone
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 54
•
"1020 Bottom door" on page 56
•
"1030 Hard disk drive or solid state drive" on page 58
•
"1070 Keyboard" on page 61
Table 15. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone
Note: The power-on board assembly (with cable) and the microphone are attached to the palm rest assembly.
Step
Screw (quantity)
1
M2 × 7mm, wafer-head, nylon-coated (3)
64
Hardware Maintenance Manual
Color
Torque
0.181 Nm
Silver
(1.85 kgfcm)