Lenovo ThinkPad Edge 11 Hardware Maintenance Manual page 91

Table 28. Removal steps of antenna kit and LCD rear cover assembly
When installing:
When you install the antenna kit, route the cables as shown in the figures below. As you route the cables, make
sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable
guides, or a wire to be broken.
a
: Wireless LAN AUX antenna (black) and wireless WAN AUX antenna (blue)
b
: Wireless LAN MAIN antenna (gray) and wireless WAN MAIN antenna (red)
1
4
3
2
a
1
3
2
4
b
.
Chapter 8 Removing and replacing a FRU
85