Completing The Migration To An Optional Smart Array Controller-Microsoft® Windows; Migrating Hard Drives To An Optional Smart Array Controller-Linux - HP ProLiant DL160se - G6 Server User Manual

Sata raid controller
Hide thumbs Also See for ProLiant DL160se - G6 Server:
Table of Contents

Advertisement

To install the driver from the Easy Set-up CD:
From the System Support Software menu, select the current operating system.
1.
Select Driver – storage controller.
2.
Download the HP ProLiant Smart Array SAS/SATA Controller Driver package.
3.
To install the driver, run the Smart Array Controller package.
4.
When the driver is installed, complete the migration procedure.
Completing the migration to an optional Smart Array
controller—Microsoft® Windows®
To complete the migration to the Smart Array controller:
Back up all data.
1.
Access the Device Manager menu:
2.
Right-click My Computer.
a.
Select Manage.
b.
In the Storage Controller section, verify that the system recognizes the Smart Array controller.
3.
Power down the server.
4.
Remove the access panel.
5.
Remove components and cables as needed.
6.
Disconnect the existing data cable from the hard drive backplane.
7.
Connect the SAS cable to the controller and hard drive backplane.
8.
This action replaces the SATA connection.
Install components and cables removed previously.
9.
Install the access panel.
10.
Power up the server.
11.
Migrating hard drives to an optional Smart Array
controller—Linux
This section provides instructions to migrate hard drives from the embedded HP Smart Array B110i SATA
RAID controller to an optional Smart Array controller in a server with the Red Hat Enterprise Linux
operating system or the SuSE Linux Enterprise Server operating system.
Before migrating hard drives, be sure that you have installed the operating system by label, using the
latest hpahcisr driver from the HP website (http://www.hp.com/go/support).
IMPORTANT:
supported. By default, a SLES installation uses a device or controller ID to partition and format
hard drives. In order to migrate drives to a Smart Array controller, you must manually change
the installation configuration to install by label.
For more information about installing Red Hat Enterprise Linux by label, see the OS documentation for
Red Hat Enterprise Linux.
Migrating drives on a SLES system installed with the default method is not
Migrating hard drives to an optional Smart Array controller 20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant dl170h - g6 serverSmart array b110i

Table of Contents