Cluster Administration
Creating IP Address Resources
1. Open the WebUI to the Cluster tab and select Cluster Resources.
2. Click Create.
3. Select Next to proceed with the wizard.
4. Specify the name, description, the cluster group the resource will reside in and the
5. Click Next.
6. Select the possible owners and click Next to continue.
7. Specify the dependencies and click Next to continue.
8. Specify the address, subnet mask, network and whether to enable NetBIOS for this
Figure 128: Creating an IP address resource
9. Review the configuration and click Finish to create the resource.
10. After the resource is created it is necessary to bring it online. In the Cluster Resources
11. Click OK on the Bring a Resource Online page to bring the new resource online.
226
resource type. The resource type should be IP Address.
address and click Next to continue.
page, select the resource and select Bring Online.
NAS 4000s and 9000s Administration Guide