Setting Permissions For An Nfs Share - HP StorageWorks 4000s - NAS Administration Manual

Cluster Administration

Setting Permissions for an NFS Share

When a share resource is created via the WebUI and brought online, the default permission is
set to: Everyone=Read-Only.
To change the default permissions:
1. From the Cluster tab, click Advanced Cluster Management.
2. Log into Remote Desktop.
3. Click the group.
4. Right-click the resource, then click Properties.
Figure 126: NFS Share Resource parameters
5. Click the Parameters tab.
6. Click Permissions.
224 NAS 4000s and 9000s Administration Guide