Managing Disks After Quick Restore - HP StorageWorks 4000s - NAS Administration Manual

Note:

Managing Disks After Quick Restore

After a Quick Restore, drive letters may be assigned to the wrong volume. Windows Storage
Server 2003 assigns drive letters after the restoration in the order of discovery. To help
maintain drive letter information, placing the drive letter into the volume label is
recommended. To change the drive letters to the appropriate ones, go into Disk Management
and perform the following steps for each volume.
1. Right-click the on the volume that needs to be changed.
2. Select Change Drive Letter and Paths.
3. In the Change Drive Letter and Paths dialog box, select Change.
Figure 44: Change Drive Letter and Paths dialog box
4. In the Change Drive Letter or Path dialog box, select the appropriate drive letter and then
Figure 45: Enter new drive letter
NAS 4000s and 9000s Administration Guide
NTFS compression is supported only if the cluster size is 4 KB or smaller.
click OK.
Disk Management
85