Cluster Administration
9. Review the configuration and click Finish to create the share.
10. After the resource is created it is necessary to bring it online. In the Cluster Resources
11. Click OK on the Bring a Resource Online page to bring the new file share resource online.
Setting Permissions for a SMB File Share
When a share resource is created via the WebUI and brought online, the default permission is
set to: Everyone=Read-Only.
To change the default permissions:
1. From the Cluster tab, click Advanced Cluster Management.
2. Log into Remote Desktop.
3. Click the group.
4. Right-click the resource, then click Properties.
Figure 124: Resource parameters for SMB file share
5. Click the Parameters tab.
6. Click Permissions.
222
page, select the resource and select Bring Online.
NAS 4000s and 9000s Administration Guide