Finding And Discovering Targets; Adding A Single Target; Entering Target Credentials; Editing A Target - HP ProLiant BL420c User Manual

Finding and discovering targets

1. Click Find Targets.
2. Select IP Address Range, Port Address, or LDAP Scan for Remote Targets, and then click OK.
IP Address–Enables you to search a range of IP addresses in IPv4 or IPv6 format. Enter
the required address range information, click Search, select the target, and then click
Add to List.
NOTE:
For example, you can search for IP address 192.168.1.1 through 192.168.1.255, but
HP SUM does not support searching ports 192.168.1.1 through 192.168.3.255.
Port Address–Enables you to search in a range of IP addresses and specific port address.
LDAP Scan for Remote Targets–Enables you to search for targets using an LDAP query.

Adding a single target

1. Click Add Single Target.
2. Type the IP or DNS address of the target.
3. Select the type of target from the dropdown list (optional). If you leave this field as the default
setting, HP SUM detect the type of target during the discovery process. If you select the correct
target type, the discovery process is faster.
4. Type a brief description of the target (optional).
5. Enter the root or administrator username and password.
6. Click OK. This begins the discovery process of the target that is added.

Entering target credentials

You must enter the credentials (administrator user name and password) for all targets, including
the local host, if you are updating it.
1. In the Select Targets screen table, select one or more targets by clicking to highlight the rows.
2. Click Enter Credentials.
3. In the Enter Credentials for the Target(s) dialog box, select one or more targets. The credentials
you enter are applied to all selected targets. The Select All button selects all targets in the list.
4. Click Add Credentials.
5. In the Enter Credentials for Target dialog box:
a. Enter a user name and password with root or administrator rights.
b. Select what HP SUM should do if it detects an update already running.
6. Click OK to save and close the dialog box.
7. Click Done.
8. In the Select Targets screen table, the Status field displays progress messages as HP SUM
verifies the credentials you entered.
NOTE:
the entire domain, not just the iLO. During the discovery process, if HP SUM detects that an
iLO is part of a target domain, HP SUM asks you if you want to manage the entire domain,
or if you want to continue to update just the iLO. To add the OA and manage the entire
domain, click Enter OA Credentials.

Editing a target

1. Highlight a target, and then click Edit Target.
2. Type a brief description of the target (optional).
22 Using the HP SUM GUI
HP SUM searches only c-class IP addresses, and a maximum of 255 targets.
HP Integrity servers only: If an iLO is part of a domain, HP recommends managing