Command-Line Examples - HP ProLiant BL420c User Manual

Command-line examples

The following command-line parameter examples can be executed within these environments:
Firmware:
◦
System ROM
◦
Smart Array controller
◦
Hard drives
◦
iLO
Software—later version of:
◦
HP Insight Diagnostics Online Edition for Windows Server 2003 (cp008097.exe)
◦
HP System Management Homepage (HP SMH) for Windows (cp008257.exe)
HP SUM
◦
Defined groups: Management Servers—three servers (Management Server1, Management
Server2, Management Server3)
Example 1:
This command-line input deploys the latest PSP and firmware components:
hpsum /use_latest /allow_non_bundle_components /silent
Results: All software components and firmware components from the update bundle, which HP
SUM determined must be installed, were installed.
Example 2:
Either of the following command-line inputs can deploy the previous version of the PSP only and
force all the components to be installed:
hpsum /f:bundle /softwareonly BP000315.xml
hpsum /b BP000315.xml /f:bundle /softwareonly
Results: All software components and firmware components from the update bundle, which HP
SUM determined must be installed, were installed. No firmware was installed.
Example 3:
This command-line input deploys firmware:
hpsum /romonly
Results: All firmware components that must be installed, were installed. No software was installed.
Example 4:
Either of the following command-line inputs can deploy two software components:
hpsum /f:software cp008097.exe cp008257.exe
hpsum /c cp008097.exe /c cp008257.exe /f:software
Results: The two components were installed. No firmware or other software was installed.
Example 5:
Either of the following command-line inputs can deploy the latest PSP, later versions of components
in the bundle, and firmware to three remote hosts and force all components to be installed:
hpsum /group "Management Servers" /current_credential /use_latest
/allow_update_to_bundle /allow_non_bundle_components /force:all
40 Using scripts to deploy updates