Installing The Motor Cover; Installing The Spool Stand; Installing The Button Tray; Installing The Eye Guard - Brother LK3-B438E MKII Instruction Manual

3. INSTALLATION

3-17 . Installing the motor cover

t

3-18 . Installing the spool stand

Assemble the spool stand q while referring to the
spool stand instruction manual, and then install the
spool stand q at the right side of the work table.

3-20 . Installing the eye guard

q
e
15
q
w
r
e
u
y
q
w
LK3-B438E Mark II
1. Install the motor cover q to the motor back cover
w with the screws e and the flat washers r.
2. Pass the motor shaft through the notch in the mo-
tor back cover w, and then tighten the screws y
and the washers u so that the clearance between
the motor pulley t and the motor cover q is
uniform.

3-19 . Installing the button tray

w
1. Install the button tray holder q with the two flat
wood screws w at a place convenient for opera-
tion.
2. Insert the button tray e into the button tray holder
q , and secure them wiith the screw r .
CAUTION
Attach all safety devices before using the
sewing machine.
If the machine is used without these de-
vices attached, injury may result.
Install the eye guard assy w to the face plate q with
the two screws e.
e
r
q