Table of Contents
Advertisement
LOCKING THE CONTROLS
The Cooktop Controls may be locked in order to prevent the cooktop from accidentally being
turned ON. This feature can be activated at any time.
To Turn ON the Controls Lock Feature:
Touch and holf the
key pad. After 5 seconds a beep will sound. The Lock Indicator Light
above the
key pad will turn ON indicating the cooktop is locked. This will keep any
Cooking Element or Cooktop functions from being accidentally turned ON.
Note: If the cooktop is in used when the Control Lock Feature is turn on, the cooktop will
automatically turn OFF and enter in Control Lock Feature Mode.
To Turn OFF the Controls Lock Feature:
Touch and hold the
key pad. After 5 seconds a beep will sound. The Lock Indicator Light
above the
key pad will turn OFF indicating the cooktop is unlocked. The Cooking
Elements or any of the other Cooktop functions may now be used.
SABBATH FEATURE MODE
When the Sabbath feature is ON, all electronic surface element control displays show "Sb"
(Fig. 1). The surface elements can be used even if the Sabbath Feature is on.
To activate the Sabbath Feature Mode:
Touch and hold for few seconds the
the left front element (for 36" model) and the
After few seconds, "Sb" will appear in all element control displays.
To turn ON a Surface Element when the Sabbath Feature is active:
If you turn on a surface element when the oven Sabbath feature is on, the electronic surface
element control will record that request and execute it with a 15-30 seconds delay. So the
element will start heating 15-30 seconds after the surface element control was turned on. The
surface element display will not show the setting because "Sb" is on in the displays. When
necessary, it is possible to adjust the power of the surface element but you have to
remember that the surface element control will adjust the temperature with the same delay.
To turn OFF the Surface Element when the Oven Sabbath Mode is active:
To shut off the surface element while the Sabbath feature is ON, proceed as usual but take
note that the element will immediately turn off without any delay.
To deactivate the Sabbath Feature Mode:
Touch and hold for few seconds the
the left front element (for 36" model) and the
"Sb" will disappear from element control displays.
Setting Surface Controls
pad of the left rear element (for 30"model) or
of the right front element at the same time.
pad of the left rear element (for 30"model) or
of the right front element at the same time.
17
of
Fig. 1
of
Advertisement
Table of Contents
