Setting Surface Controls; Led Messages Or Light Indicators Displayed By Main Control; Led Messages Or Light Indicators Displayed By Cooking Element Controls - Electrolux 318 200 635 (0606) Rev. A Use & Care Manual

318 200 635 (0606) rev. a use & care guide electric cooktop
Table of Contents

Advertisement

LED MESSAGES OR LIGHT INDICATORS DISPLAYED
BY MAIN CONTROL
CONTROLS LOCK - This feature allows the cooktop to be locked at anytime. Touch
and hold the LOCK key pad for few seconds. If the cooktop is in use it will automati-
cally shut off the cooktop to enter in the lock mode. A beep will sound and the Lock
indicator light will glow (Fig. 2). Once locked, no other displays will glow and no
Cooking Zones will activate. To turn the Controls Lock OFF, touch and hold the
LOCK key pad for few seconds. A beep will sound, the Lock indicator light will turn
OFF (Fig. 1) and the cooktop may be used normally.
COOKTOP POWER - The Cooktop POWER key pad activates the entire Cooktop.
To power the cooktop, touch and hold the POWER key pad. A beep will sound and
the Power LED will glow (See Fig. 4). The cooktop will be in a ready mode. If no
other key pads are touched the Cooktop Main POWER will turn OFF automatically.
To turn the Main Power OFF touch and hold the Main POWER key pad. A beep will
sound and the Power Indicator Light will turn OFF (See Fig. 3).
Errors Codes F XX - The control displays
digits in Main Control LED (Fig. 6) together showing an error code.
LED MESSAGES OR LIGHT INDICATORS DISPLAYED
BY COOKING ELEMENT CONTROLS
COOKING ZONE ON/OFF PAD - Each Cooking Elements have separate ON/OFF
key pads. Once the Main Power key pad has been touched to activate the cooktop,
touch the corresponding Cooking Element ON/OFF key pad once to active the
"- -"
"- -"
"- -"
"- -"
"- -"
Cooking Zone needed.
located above the key pad will glow (Fig. 8). If the corresponding + (increase) / -
(decrease) key pad is not touched, the request to turn the Cooking Element ON will
cancel and the Cooktop Main Power will turn OFF. To set a Cooking Element power
level touch the corresponding Cooking Element + (increase) or - (decrease) key
pad once. To turn OFF a Cooking Element, touch the Cooking Element ON/OFF
key pad once. The Cooking Element Indicator Light will turn OFF (Fig. 7).

Setting Surface Controls

F F F F F
in Cooking Elements LEDs (Fig. 5) and
will appear in the LED display and the indicator light
11
Fig. 1
Fig. 2
POWER
POWER
Fig. 3
Fig. 4
Fig. 5
Fig. 6
On/Off
On/Off
Fig. 7
Fig. 8

Advertisement

Table of Contents
loading

Table of Contents