Red Hat Linux* 8.0 Segmentation Fault With An Intel® Raid Controller Installed - Intel SE7501WV2ATA Hardware Manual

Tested hardware and operating system list
Table of Contents

Advertisement

Intel® Server Board SE7501WV2
069.html.
Guideline:
Red Hat Linux kernel version update resolves this issue.
Status:
This issue has been resolved in Red Hat Linux kernel version update.
6.6
Red Hat Linux* 8.0 segmentation fault with an Intel® RAID
controller installed
Issue:
When using the normal installation of Red Hat Linux* 8.0 with the 2.4.18-14
kernel and an Intel RAID controller installed, the following issue is seen:
Implication:
The Red Hat Linux 7.3, 2.4.18-14 SMP kernel does not function properly with the
Intel RAID controller driver. See
069.html.
Guideline:
Red Hat Linux kernel version update resolves this issue.
Status:
This issue has been resolved in Red Hat Linux kernel version update.
Revision 3.5
4. A shutdown command results in a segmentation fault.
5. It is not possible to use some tools such as storcon.
6. Accessing the proc file system (via cat /proc/scsi/gdth/#,
where "#" stands for the controller number, also results in a
segmentation fault.
This issue occurs only when using Red Hat kernel version
2.4.18-14 installed with SMP support, and it is not server board
or RAID controller specific.
https://rhn.redhat.com/errata/RHBA-2003-
Installation Guidelines
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se7501wv2

Table of Contents