Using The Machine Setting Mode Key - Brother Isodore„ Innov-ís 5000 Operation Manual

LCD SCREEN

Using the Machine Setting Mode Key

Press to change the default machine settings (needle stop position, embroidery speed, opening
display, etc.) Press
Memo
• This function will be available in future technology upgrades.
• Press
Sewing settings
a Select whether to use the sewing speed controller to determine the zigzag width (see page 70).
b Make adjustments to character or decorative stitch patterns (see page 103).
c Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.)
d Adjust the presser foot pressure. (The higher the number, the higher the pressure will be. Set the pressure at 3 for
normal sewing.)
e Select whether "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is the utility stitch that is automatically
selected when the machine is turned on.
f Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page 53).
Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm).
g Change the height of the presser foot when the machine is set to free-motion sewing mode (see page 83).
h When set to "ON", the thickness of the fabric is automatically detected by an internal sensor while sewing, so the
fabric can be fed smoothly (see pages 47 and 55).
i Adjust the character spacing on Character/Decorative stitch (see page 101).
12
, or
or to display a different settings screen.
to display the different settings screens.
a
b
c
d
e
f
g
h
i