Attaching The Embroidery Frame; Removing The Embroidery Frame - Brother Isodore„ Innov-ís 5000 Operation Manual

ATTACHING THE EMBROIDERY FRAME

Note
Wind and insert the bobbin before attaching the embroidery frame.
a
Press the "Presser Foot Lifter" button to
raise the presser foot.
b
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
b
a Embroidery frame holder
b Embroidery frame guide
c
Slide the embroidery frame into the holder,
making sure to align the embroidery frame's
with the holder's
a Arrow mark
a
.
a

ATTACHING THE EMBROIDERY FRAME

d
Lower the frame-securing lever to be level
with the frame to secure the embroidery
frame in the embroidery frame holder.
a
a Frame-securing lever
CAUTION
• If the frame-securing lever is not lowered, the
embroidery pattern may not sew out correctly
or the presser foot may strike the embroidery
frame and cause injury.

■ Removing the Embroidery Frame

a
Raise the frame-securing lever.
b
Pull the embroidery frame toward you.
5
143