Sewing Embroidery Patterns Which Use Appliqué; When Threading Manually - Brother Isodore„ Innov-ís 5000 Operation Manual

SEWING AN EMBROIDERY PATTERN

■ When Threading Manually

a
Thread the machine manually with the first
color (see "Threading Manually" on page
27).
b
Lower the presser foot, then press the
"Start/Stop" button to start embroidering.
After 5-6 stitches, press the "Start/Stop"
button again to stop the machine.
c
Trim the excess thread at the end of the
seam. If the end of the seam is under the
presser foot, raise the presser foot, then
trim the excess thread.
Memo
If there is thread left over from the beginning
of sewing, it may be sewn over as you con-
tinue embroidering the pattern, making it very
difficult to deal with the thread after the pattern
is finished. Trim the threads at the beginning.
d
Press the "Start/Stop" button again to
restart the machine.
e
Repeat steps
section.
148
c d
and from the previous
Sewing Embroidery Patterns
Which Use Appliqué
There are some patterns which call for an appliqué
inside the pattern.
When sewing an embroidery pattern with an
appliqué, the color sewing order display shows
"Appliqué Material", "Appliqué Position",
"Appliqué", and then the sewing order of the
colors around the appliqué.
Memo
Depending on the thread color display setting,
the display may show
, or
a
Attach an iron-on stabilizer to the wrong
side of the appliqué material.
a Appliqué material (cotton, felt, etc.)
b Iron-on stabilizer
b
Place the appliqué material into the
embroidery frame, and then press the
"Start/Stop" button to sew the outline of
the appliqué.
a Outline of appliqué
b Appliqué material
Memo
The embroidery procedure is the same as the
basic procedure explained on pages 147
through 148.
→ The machine will sew around the outline of the
appliqué pieces and will then stop.
,
.
a
b
a
b