Brother Isodore„ Innov-ís 5000 Operation Manual page 66

SEWING THE STITCHES
a
Select a stitch.
b
Attach presser foot "J".
c
Hold the thread tails and fabric with your
left hand, and turn the handwheel with
your right hand to insert the needle into the
fabric.
a Sewing start position
d
Lower the presser foot, and hold the
"Reverse/Reinforcement Stitch" button to
sew 3-4 stitches.
→ The machine sews reverse stitches (or reinforcement
stitches).
e
Press the "Start/Stop" button to sew
forward.
a
a Reverse stitches
→ The machine will begin sewing slowly.
54
Be sure the needle does not strike a basting pin, or
any other objects, during sewing. The thread
could tangle or the needle could break, causing
injury.
f
When sewing is completed, hold the
"Reverse/Reinforcement Stitch" button to
sew 3-4 reverse stitches (or reinforcement
stitches) at the end of the seam.
g
After sewing, press the "Thread Cutter"
button to trim the threads.
a
Memo
■ Changing the Needle Position (Left
or Middle Needle Position Stitches
Only)
When you select left or middle needle position
stitches, you can use
width display to change the position of the needle.
Match the distance from the right edge of the presser
foot to the needle with the stitch width, then align
the edge of the presser foot with the edge of the
fabric during sewing for an attractive finish.
CAUTION
When the automatic thread cutting and auto-
matic reinforcement stitch keys on the screen
are selected, reverse stitches (or reinforce-
ment stitches) will be sewn automatically at
the beginning of sewing when the "Start/Stop"
button is pressed. Press the "Reverse/Rein-
forcement Stitch" button to sew reverse
stitches (or reinforcement stitches) and trim
the thread automatically at the end of sewing.
and in the stitch