Table of Contents
Advertisement
28
HP StorageWorks Disk System 2100 / 2110
STM Disk Information: MPE/iX 6.5 or Later
STM displays the last-generated Information Log for a selected disk. Start STM and
run the Information tool as follows.
1
Log on the system.
2
At the system prompt (:), type vsclose <physical volume number>. This removes
the disk from use.
3
At the system prompt (:), type cstm. STM starts.
4
At the cstm prompt, type map. STM displays a list of all the disks installed on the
system.
5
Select the desired disk by typing select device <number>; for example, select
device 15.
6
Type information. STM updates the system map.
7
To display the information log, type infolog. A sample information log is shown
in Figure 16.
Advertisement
Table of Contents
