View Disk Status; Stm Disk Information: Hp-Ux - HP StorageWorks 2100 - Disk System User Manual

26 HP StorageWorks Disk System 2100 / 2110

View Disk Status

HP-UX and MPE/iX utilities provide descriptive and diagnostic information about
disks, including disk type, firmware revision, and errors. On HP-UX and MPE/iX 6.5
or later, the disk utility is Support Tools Manager (STM). For all other operating
systems, consult the appropriate system administration manual for disk module status
checking procedures.

STM Disk Information: HP-UX

STM displays the last-generated Information Log for a selected disk. Start STM and
run the Information tool as follows.
Figure 15 shows a sample Information Log.
1 Log on the system.
2
At the system prompt, type xstm&. STM starts and displays a graphic of the
devices on the system.
3 Select the desired disk.
4
Select Information from the Tools menu.
5 To generate a current log, select Run. The log will be displayed as soon as it is
generated
6
To view a log without updating the contents, select Information Log.
7 Select Done when you have finished viewing the information.
8
To quit STM, type exit.