Viglen D865GLC - Desktop Board Motherboard Manual page 88

ATAPI CD-ROM Drives Submenu
This submenu is for configuring the boot sequence for ATAPI CD-ROM drives.
1st ATAPI CDROM
A detailed description is given for each item in the following table.
Table 43: ATAPI CD-ROM Drive Submenu
Feature Options
1st ATAPI Dependent on installed
CDROM ATAPI CD-ROM drives
(Note)
Note: This boot device submenu appears only if at least one boot device of this type is installed. This
list will display up to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives
supported by the BIOS.
BIOS SETUP UTILITY
Boot
[Pioneer DVD-ROM ATPIM]
Figure 39: ATAPI CD-ROM Drive Submenu
Description
Specifies the boot sequence from the available ATAPI
CD-ROM drives. To specify boot sequence:
1. Select the boot device
2. Press <Enter> to set the selection as the intended
boot device.
D865GLC Motherboard Manual
Specifies the boot
sequence from the
available boot devices.
Select the boot device
With UpArrow or
DownArrow Key. Press
Enter to Set the
selection as the
intended boot device.
ARMD= ATAPI Removable
Media Device.
←→
Select Menu
↑↓
Select Item
Tab Select Field
Enter Select sub-menu
F1 General Help
F9 Setup Defaults
F10 Save and Exit
ESC Exit
87