Chipset Configuration Submenu - Viglen D865GLC - Desktop Board Motherboard Manual

Chipset Configuration Submenu

This submenu is for configuring the chipset features.
Advanced
Chipset Configuration
Setup Warning:
Setting items on this screen to incorrect values
may cause your system to malfunction.
ISA Enable Bit ISA Enable Bit ISA Enable Bit ISA Enable Bit
PCI Latency timer
8Burn-In Mode
Extended Configuration
Chipset Memory Timing Control
SDRAM Frequency
CPC Override
SDRAM Timing Control
SDRAM RAS Act. To Pre.
SDRAM CAS# latency
SDRAM RAS# to CAS# delay
SDRAM RAS# Precharge
A detailed description of each of the features of the menu is given in the following
table.
Table 34: Video Configuration Submenu
Feature Options
ISA Enable Bit
• Disabled
• Enabled (default)
PCI Latency timer • 32 (default)
• 64, 96,128
• 160, 192, 224
• 248
Extended • Default (default)
Configuration
• User defined
SDRAM • Auto (default)
Frequency
• 266 MHz
• 333 MHz (Note 2)
• 400 MHz (Note 3)
BIOS SETUP UTILITY
[Enabled] [Enabled] [Enabled] [Enabled]
[32]
[Default]
[Auto]
[Auto]
[Auto]
[7]
[2.5]
[3]
[3]
Figure 29: Chipset Configuration Submenu
Description
When set to Enable, a PCI-to-PCI bridge will only
recognise I/O addresses that do not alias to an ISA
range (within the bridge's assigned I/O range).
Allows you to control the time (in PCI bus clock
cycles) that an agent on the PC bus can hold the
bus when another agent has requested the bus.
Allows the setting of extended configuration
options
Allows override of the detected memory frequency.
NOTE:
reboot for the change to take effect. After changing
this setting and rebooting, the System Memory
Speed parameter in the Main menu will reflect the
new value.
D865GLC Motherboard Manual
Some older expansion
Devices require this
to be enabled.
←→
Select Menu
↑↓
Select Item
Tab Select Field
Enter Select sub-menu
F1 General Help
F9 Setup Defaults
F10 Save and Exit
ESC Exit
If SDRAM Frequency is changed, you must
75