10
Installation
BeFORe YOU START
Remove the coffee maker from the packaging and inspect it for damage. Do not
install a damaged maker. To prevent damage to the control panel door, do not set
the appliance on the floor or counter prior to installation.
Check to make sure all parts are included.
PARTS lIST
•
Steam barrier with mounting screws
•
2 guide assemblies with mounting screws
•
6" metal shims, 1/16" (1mm)
•
Three foot 1/4" to 3/4" flexible water supply hose(E24CM76GSS)
•
Use & care guide
•
Detergent tablets (sample)
•
Spare tank O-ring (model E24CM75GSS)
•
Spare piston assembly O-ring
•
Allen wrench (for grinder adjustment)
•
Anti-liming powder (sample)
•
Measuring cup for ground coffee
•
Cleaning brush
•
Keys (taped to the right side of the unit)