Preparing For Installation; Planning The Location - Electrolux ICON E24CM76GSS Installation Instructions Manual

PlANNING THe lOCATION

24"
(610mm)
3/4" (19mm)
Min. Side Walls
3/4" (19mm)
Level Support Platform
Optimal Water
and Electrical
17 7/8"
Supply Location
(454mm)
8""
(203mm)
1" (26mm)
IMPORTANT:
• All statutory regulations, local and regional codes and local power supply
company connection specifications must be strictly observed.
• The supplied power cord is 60" (152.4cm) long, terminated by a three-prong
plug. It is located in the lower right rear corner on the back of the unit. It must
be plugged directly into a dedicated, wall-mounted electrical receptacle.
• The electrical outlet (and water shut off valve for model E24CM76GSS)
should be located in an adjacent cabinet. Both must be accessible when the
unit is installed.
• The coffee maker(E24CM76GSS) is supplied with a flexible water hose for
connection to a 1/4" threaded water line connection. See page 12 for further
information on planning the water line connection.
• The coffee maker must be installed at a safe distance from other sources
of heat, such as home appliances, in order to avoid an excessive rise in
temperature.
• For ventilation purposes, there must be a slot near the top of the cabinet
back. The minimum dimensions are 4" X 12" (10.0 X 30.0cm).

Preparing for Installation

4" X 12"
(100mm - 300mm)
Ventilation Cut-Out
in Cabinet Back
22 1/8" - 22 3/8"
(562mm - 568mm)
1" Min.
(26mm)
Steam Barrier
(provided)
20 3/4"
(527mm)
1/8"
(3mm)
22 3/16"
(564mm)
Screw 8 places
(provided)
3/4" (19mm)
Min. Side Walls
1" Min. (26mm)
7